The IAAC Multilateral Recognition Arrangement (MLA) is an agreement among accreditation bodies by which they recognize the accreditations issued by each other. Such system of mutual recognition of accreditations is based on the proper operation of the accreditation systems of the bodies that join the arrangement. In order to establish and maintain an MLA, a program to establish and maintain mutual confidence among the bodies that are signatories to the IAAC MLA is required. The principal elements of that program are:

• Participation in programs of peer evaluation and re-evaluation;
• Exchange of information on the development and operation of accreditation systems;
• Participation of personnel from IAAC MLA members in assessment, re-assessment or surveillance visits to conformity assessment bodies performed by other IAAC MLA member bodies; and
• Participation in IAAC meetings.

The IAAC MLA Group is the organizational unit formed by accreditation bodies that are signatories of the IAAC MLA.

By reducing the need for multiple assessments, IAAC’s MLAs facilitate international trade by encouraging regional and worldwide acceptance of valid certificates, registrations and results issued by signatory accreditation bodies.Participation in the IAAC MLA can raise the status of, and increase confidence in, signatory accreditation bodies nationally and internationally by means of the formal links with competent accreditation bodies in other countries.

The conditions for joining IAAC’s MLAs are:

• Full membership in IAAC;
• Agreement to abide by the terms and conditions of the IAAC MLA;
• Demonstration, through evaluations and through witnessing of its assessment process, that it satisfies the following requirements:

1. conformance with pertinent ISO/IEC guides and related IAF or ILAC guidance documents;
2. conformance of all accredited bodies with the relevant ISO/IEC guides;
3. completion of at least one accreditation process in each of the accreditation programs for which it applies; and
4. availability of sufficient evidence to demonstrate that the applicant body’s arrangements for management review and internal audit have been implemented, are effective, and will be maintained.

IAAC Administrative Documents define and formalize the rules and commitments for membership in IAAC and in the IAAC MLA are issued on the authority of the IAAC General Assembly. IAAC Administrative Documents that are not related to membership in IAAC or the MLA are issued under the authority of the IAAC Executive Committee.

IAAC Publications Documents are other documents that may be of interest to IAAC members and are published under the authority of the Executive Committee.

IAAC Guidance Documents are documents which provide non mandatory applications of MLA requirements published on the authority of the Executive Committee. This category also includes the Recommended International Documents which are ILAC and IAF non mandatory documents adopted by IAAC, as described in IAAC PR 001. Translations of ILAC/IAF documents prepared by IAAC also apply to this category.

List of IAAC Crossfrontier Accreditation contacts

IAAC member accreditation bodies have provided the following contact persons who handle Crossfrontier Accreditation related issues.

 

	Country	Body	Contact Name	E-mail
1	Argentina	Organismo Argentino de Acreditación, OAA	Rubén Aguglino	This email address is being protected from spambots. You need JavaScript enabled to view it.
2	Brazil	Coordenação Geral de Acreditação, Cgcre Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, INMETRO	Ricardo Fermam	This email address is being protected from spambots. You need JavaScript enabled to view it.
3	Canada	Standards Council of Canada, SCC	William O'Neill	This email address is being protected from spambots. You need JavaScript enabled to view it.
4	Chile	Instituto Nacional de Normalización, INN	Eduardo Ceballos	This email address is being protected from spambots. You need JavaScript enabled to view it.
5	Colombia	Organismo Nacional de Acreditación de Colombia, ONAC	Mauricio Rodriguez	This email address is being protected from spambots. You need JavaScript enabled to view it.
6	Costa Rica	Ente Costarricense de Acreditación, ECA	Ilse Delgado	This email address is being protected from spambots. You need JavaScript enabled to view it.
7	Cuba	Órgano Nacional de Acreditación de la República de Cuba, ONARC	María Miranda	This email address is being protected from spambots. You need JavaScript enabled to view it.
8	República Dominicana	Organismo Dominicano de Acreditación, ODAC	Francisco Garrido	This email address is being protected from spambots. You need JavaScript enabled to view it.
9	Ecuador	Servicio de Acreditación del Ecuador, SAE	Carlos Echeverría	This email address is being protected from spambots. You need JavaScript enabled to view it.
10	Guatemala	Oficina Guatemalteca de Acreditación, OGA	Duberly Barillas	This email address is being protected from spambots. You need JavaScript enabled to view it.
11	Jamaica	Jamaica National Agency for Accreditation, JANAAC	Sharonmae Shirley	This email address is being protected from spambots. You need JavaScript enabled to view it.
12	México	Entidad Mexicana de Acreditación, ema	Carlos Rangel, Organismos de Certificación	This email address is being protected from spambots. You need JavaScript enabled to view it.
			Carlos Rangel, Laboratorios	This email address is being protected from spambots. You need JavaScript enabled to view it.
			Renato Ortíz, Organismos de Inspección	This email address is being protected from spambots. You need JavaScript enabled to view it.
13	Nicaragua	Organismo Nacional de Acreditación, ONA	Walter Orozco	This email address is being protected from spambots. You need JavaScript enabled to view it.
14	Paraguay	Organismo Nacional de Acreditación, ONA	Alba Cabrera	This email address is being protected from spambots. You need JavaScript enabled to view it.
15	Perú	Instituto Nacional de la Calidad - Dirección de Acreditación, INACAL-DA	Patricia Aguilar	This email address is being protected from spambots. You need JavaScript enabled to view it.
16	El Salvador	Organismo Salvadoreño de Acreditación, OSA	Wendy Regalado	This email address is being protected from spambots. You need JavaScript enabled to view it.
17	Trinidad & Tobago	Trinidad and Tobago Laboratory Accreditation Services, TTLABS	Karlene Lewis	This email address is being protected from spambots. You need JavaScript enabled to view it.
18	Uruguay	Organismo Uruguayo de Acreditación, OUA	Liliane Somma	This email address is being protected from spambots. You need JavaScript enabled to view it.
19	Estados Unidos	AIHA, Laboratory Accreditation Programs, AIHA-LAP	Cheryl Morton	This email address is being protected from spambots. You need JavaScript enabled to view it.
20	Estados Unidos	ANSI National Accreditation Board, ANAB	Lori Gillespie	This email address is being protected from spambots. You need JavaScript enabled to view it.
21	Estados Unidos	National Voluntary Laboratory Accreditation Program -National Institute for Standards and Technology, NVLAP-NIST	Robert Knake	This email address is being protected from spambots. You need JavaScript enabled to view it.

Accreditation is the independent evaluation of conformity assessment bodies against recognised standards to ensure their impartiality and competence. Through the application of national and international standards, government, procurers and consumers can have confidence in the calibration and test results, inspection reports and certifications provided.

Accreditation bodies are established in many countries, with the main objective of ensuring that conformity assessment bodies are supervised by a competent body.

Accreditation bodies, which have been evaluated by peers as competent, sign arrangements (the IAF Multilateral Recognition Arrangement (MLA) and the ILAC Arrangement (MRA) that enhance the acceptance of products and services across national borders, thereby creating a framework to support international trade through the removal of technical barriers. These arrangements are managed by the International Accreditation Forum (IAF), in the fields of management systems, products, services, personnel and other similar programmes of conformity assessment, and the International Laboratory Accreditation Cooperation (ILAC), in the fields of laboratory and inspection accreditation.

The purpose of the arrangement is to ensure mutual recognition of accredited certification, inspection and laboratories between signatories to the MLA/MRA, and subsequently acceptance of accredited certification, inspection and laboratories in many markets based on one accreditation.

The ILAC/IAF Arrangements build upon existing or developing regional arrangements established around the world. The bodies participating in these regional arrangements are responsible for maintaining the necessary confidence in accreditation bodies from their region that are signatories to the ILAC/IAF Arrangements.

The primary method of maintaining confidence in the accreditation bodies is the evaluation by peers.The evaluation of an accreditation body to establish its qualifications to be a signatory involves a team of peers (generally senior staff of experienced accreditation bodies). Evaluations include time spent at the headquarters office of the applicant body to determine compliance with ISO/IEC 17011. Additionally, the evaluators witness the performance of the applicant’s assessors during actual assessments/reassessments to determine if the laboratories, inspection or certification bodies are in compliance with the respective accreditation standards and that there is sufficient depth of examination to determine competence.

In order to maintain the value and meaning of the ILAC/IAF Arrangements, the signatories agree to notify each other about any significant changes in the status or operation of the accreditation body. Issues of significance include changes in name or legal/corporate status; new agreements negotiated with other accreditation bodies or the revision, suspension or termination of any such agreements; changes in key senior staff or the organisational structure; or significant changes in the operations of the body.Accreditations granted by IAF/ILAC MLA/MRA signatories are recognised worldwide based on their equivalent accreditation programs, therefore reducing costs and adding value to business and consumers.

How does the MLA/MRA benefit you?

For Government – The MLA/MRA provides governments with a credible and technically robust framework on which to further develop and enhance government to government bilateral and multilateral international trade agreements. The long-term aim is the full accepted use and recognition, by both public and private industries, of accredited laboratories, including results from accredited laboratories in other countries. In this way, the free-trade goal of “a product tested once, accepted everywhere” will be realised. For Regulators – The MLA/MRA acts as an internationally recognised ‘stamp of approval’ to demonstrate compliance against agreed standards and requirements. Consequently, risk is minimised, as decisions will be based on reliable test results. Duplication is also minimised as test and calibration data included in submissions for product approvals can be evaluated without re-testing. Many specifiers, such as government agencies, have recognised the importance of credible accreditation programs that are developed against internationally recognised standards. Accreditation and the ILAC MRA help regulators meet their own legislated responsibilities by providing a globally recognised system to accept accredited test reports.

Para los usuarios de la Industria – El MLA/MRA garantiza que las empresas que dependan de datos de ensayos y calibración poseen mayor confianza en la precisión de los informes de ensayos y calibración que ellos compran, por haber sido generados por instalaciones evaluadas como siendo competentes para realizar estas actividades específicas. Los usuarios deberían verificar el alcance actual de la acreditación del laboratorio en la compra de tales servicios.

For Industry users – The MLA/MRA ensures that businesses that depend on test and calibration data have greater confidence in the accuracy of the test and calibration reports they purchase, because they have been generated by facilities assessed as being competent to carry out these specific activities. Users should check the current scope of the laboratory’s accreditation when purchasing such services. For Manufacturers – The MLA/MRA ensures that manufacturing businesses can derive significant savings. Rather than bearing the costs of setting up internal assessments to confirm the quality of the testing and calibration results on their products, businesses can choose to defer to the assessments of internationally recognised competent accreditation bodies that are IAF/ILAC signatories, and in addition benefit from the market access the IAF/ILAC MLA/MRA provides.

For Consumers – The MLA/MRA provides additional confidence to the general public and consumers purchasing testing and calibration services on their sample, instrument or product. By insisting that the calibration or test results are from an accredited facility, they can be confident the laboratory has been assessed by an independent accreditation body, that itself has been recognised as meeting international standards of competence.

International news and examples regarding the effective implementation of the ILAC Mutual Recognition Arrangement (MRA) and of IAF Multi-lateral Recognition Arrangement (MLA)

IAAC Forms and templates are used to keep records of implementation of IAAC management system and MLA procedures, and are published under the authority of the Executive Committee.

This page includes the list of documents that are necessary for IAAC peer evaluators to carry out peer evaluations. These documents include Mandatory Documents and applicable Forms.

FM - FORMS

IAAC Forms and templates are used to keep records of implementation of IAAC management system and MLA procedures, and are published under the authority of the Executive Committee.

GD - DOCUMENTS

IAAC Guidance Documents are documents which provide non mandatory applications of MLA requirements published on the authority of the Executive Committee. This category also includes the Recommended International Documents which are ILAC and IAF non mandatory documents adopted by IAAC, as described in IAAC PR 001. Translations of ILAC/IAF documents prepared by IAAC also apply to this category.

MD - MANDATORY DOCUMENTS

IAAC Mandatory Documents are documents that provide MLA requirements and mandatory applications of MLA requirements published under the authority of the IAAC General Assembly. This category also includes the International Documents Mandatory for the MLA which are ILAC and IAF mandatory documents adopted by IAAC, as described in IAAC PR 001. Translations of ILAC/IAF documents prepared by IAAC also apply to this category.

TRAINING COURSES

Topic	Place, Date and Languages	Instructors	Sponsors	Reports
Workshop for new IAAC peer evaluators	Virtual meeting April 10-20, 2023 Spanish	Paola Marsico, MLAC Chair Liliane Somma, OUA Sergio Hurtado, OGA	IAAC	Presentations available in the Members Only Section of the MLAC
Workshop for IAAC peer evaluators on ISO/IEC 17029	Virtual meeting February 7, 2023 English-Spanish	Daniele Pernigotti of AEQUILIBRA, Italy	IAAC PTB	Presentations available in the Members Only Section of the MLAC
Webinar on FDA Accredited Third-Party Certification Program (TPP)	Virtual meeting December 09, 2022 English-Spanish	Doriliz De Leon, FDA, USA Lori Gillespie, ANAB, USA Dimitrios Katsieris, IAS, USA Simone Mills and Gabrielle Andrade-Bell, JANAAC, Jamaica Martha Mejía, EMA, Mexico	IAAC	Video recording is available on IAAC YouTube channel
Second workshop for IAAC peer evaluators on MD002 and Analysis of Case Studies	Virtual meeting December 06, 2022 Spanish-English	Paola Marsico, MLAC Chair Ferney Chaparro, Technical Secretary	IAAC	Presentations available in the Members Only Section of the MLAC
Workshop for IAAC peer evaluators on the interpretation of the IAF MD 025 document and cases related to the suitability of a conformity assessment scheme.	Virtual meeting October 25, 2022. Spanish-English	Paola Marsico, MLAC Chair Ferney Chaparro, Technical Secretary	IAAC	Presentations available in the Members Only Section of the MLAC
IAAC Workshop on the ISO/IEC 17029:2019 standard “Conformity assessment. General principles and requirements for validation and verification bodies"	Virtual meeting September 21-23, 2022. Spanish-English	Daniele Pernigotti of AEQUILIBRIA S.R.L.	IAAC PTB	Attendance list available in the Members Only Section of the CBSC
Workshop for IAAC peer evaluators	Virtual meeting August 2, 2022. Spanish-English	Paola Marsico, MLAC Vice-Chair Ferney Chaparro, Technical Secretary	IAAC	Video and presentations available in the Members Only Section of the MLAC
Webinar on Digital Transformation for Accreditation	Virtual  July 28, 2022. Spanish-English	Various international speakers	IAAC PTB	Video available in the IAAC You Tube channel
Workshop for IAAC peer evaluators on the ISO/IEC 17024 standard, IAAC and IAF requirements.	Virtual meeting January 26, 2022. Spanish	Ilse Delgado of ECA, Costa Rica	IAAC	Video and presentations available in the Members Only Section of the MLAC
Workshop for IAAC accreditation bodies to share the experience achieved in the management of "Flexible Scopes".	Virtual meeting December 14, 2021. Spanish	Yrene Caballero of ONA, Paraguay and IAAC members	IAAC	Video and presentations available in the Members Only Section of the LSC
Workshop on the ISO/IEC 17029: 2019 standard “Conformity assessment. General principles and requirements for validation and verification bodies"	Virtual meeting February 22 and 24, 2021. Spanish-English	Stefanie Vehring	IAAC	Video and presentations available in the Members Only Section of the CBSC
Dissemination of ILAC P10 "Policy for the metrological traceability of measurement results".	Virtual meeting January 26, 2021. Spanish-English	Giulia Suriani	IAAC	Video and presentations available in the Members Only Section of the LSC
Workshop on Risk Management According to ISO/IEC 17025:2017	Virtual meeting November 10 & 12, 2020. Spanish-English	Pedro M. Sismondi	PTB SIM COPANT IAAC	Risk Management According to ISO/IEC 17025:2017- attendance list
Workshop on Determination of Calibration Intervals	Virtual meeting November 2nd & 4th, 2020. English	Claudia Santo	PTB SIM COPANT IAAC	Determination of Calibration Intervals - attendance list
Workshop on Determination of Calibration Intervals	Virtual meeting October 27 & 29, 2020. Spanish	Claudia Santo	PTB SIM COPANT IAAC	Determinación de intervalos de Calidad- Lista de asistencia
Workshop for new peer evaluators on the ISO/IEC 17011:2017 standard and the IAAC MD 002 procedure for peer evaluations.	Washington DC, USA October 7 to 9, 2019.	Barbara Belzer of NVLAP, USA Robert Knake of A2LA, USA	IAAC ANAB
Workshop for new peer evaluators on the ISO/IEC 17011:2017 standard and the IAAC MD 002 procedure for peer evaluations.	Mexico City, Mexico August 12 and 13, 2019.	Eduardo Ceballos of INN, Chile Sergio Hurtado of ema, Mexico	IAAC ema
Workshop for experienced peer evaluators focused on key topics of ISO/IEC 17011:2017, aimed at harmonizing its interpretation and application during IAAC peer evaluations.	Rio de Janeiro, Brazil March 16 and 17, 2019	Veronica Garcia, Independent consultant Ferney Chaparro of ONAC, Colombia Barbara Belzer of NVLAP, USA Cristina Draghici of SCC, Canada	IAAC Cgcre PTB	ISO/IEC 17011:2017 - Workshop report
IAAC experienced peer evaluator workshop using the newly revised ISO/IEC 17011:2017.	Buenos Aires, Argentina March 10-11, 2018, English-Spanish	Andrea Melo of Cgcre, Brazil. Barbara Belzer of NVLAP, USA Carlos Archila of OGA, Guatemala	IAAC OAA PTB	ISO/IEC 17011:2017 -Attendance list ISO/IEC 17011:2017 - Workshop report
Workshop on ISO/IEC 17025:2017	Guatemala City, Guatemala, February 26-28, 2018,	Warren Merkel, NIST, USA & Imilce Zuta Chong, PTB	IAAC OGA PTB	ISO/IEC 17011:2017 - Workshop report ISO/IEC 17025:2017 -Attendance list
Workshop for new peer evaluators. ISO/IEC 17011:2004	Ecuador, Quito, December 12-14, 2017 English-Spanish	Victor Angeles ema, Mexico and Ignacio Guerreiro (independent consultant)	IAAC SAE	ISO/IEC 17025:2017 - Workshop report ISO/IEC 17011:2004 - Workshop Concept
Workshop Implementing ISO/ IEC 17034: Challenges for Quality Infrastructure Organizations in Latin America & the Caribbean	El Salvador, San Salvador, December 4-6, 2017, English & Spanish	Robert Knake, A2LA, USA & Kelly Black , A2LA, USA	IAAC QICA OSA PTB	ISO/ IEC 17034:2017 - Workshop report
Workshop on ISO/IEC 17011:2017 focused on changes in the newly revised standard, with a target audience of representatives of Accreditation Bodies.	Bogota, Colombia August 20, 2017 English and Spanish	Barbara Belzer (NVLAP, USA) & Randy Dougherty (ANAB, USA)	IAAC ONAC
Buenos Aires, Argentina May 9-11, 2017 English and Spanish	Mauricio Péricles (CGCRE, Brazil) & Ricardo Rey (OAA, Argentina)	IAAC OAA PTB	ISO/IEC 17021-1:2015 - Workshop report
Workshop on "Implementing ISO IEC 17043:2010 and ISO 13528:2015 Challenges for Quality Infrastructure Organizations in Latin America & the Caribbean"	Panama City, Panama March 20-22, 2017 English and Spanish	Dan Tholen	IAAC QICA PTB	ISO/IEC 17043:2010 e ISO 13528:2015 - Workshop report
Workshop for new peer evaluators	Santiago, Chile July 27-29, 2016 Spanish		IAAC INN PTB	New peer evaluators - Workshop report New peer evaluators - Workshop feedback
Workshop for peer evaluators with a scope on Inspection Bodies	Virtual Workshop November 16-20, 2015 Spanish		IAAC OAA	Report is available in the Members Only Section of the MLAC
Workshop on ISO/IEC 17067, applied to energy efficiency.	San Jose, Costa Rica September 12-23, 2015 English and Spanish		IAAC ECA PTB	ISO/IEC 17067 -Workshop report New peer evaluators - Workshop feedback
2nd Workshop on Traceability Measurement Results	Santo Domingo, Dominican Republic September 3 & 4, 2015 English and Spanish		IAAC ODAC PTB	Talleza Trazabilidad Results Measurements - Report of the workshop New peer evaluators - Workshop feedback
Workshop for new IAAC peer evaluators	Ottawa, Canada July 14-16, 2015 English		IAAC SCC PTB	New peer reviewers - Ottawa - Workshop Report
Workshop for new IAAC peer evaluators	Bogota, Colombia Bogota, Colombia Spanish		IAAC ONAC PTB	New peer reviewers - Colombia - Workshop Report
Workshop on exchange of Experiences about the Interpretation of the ISO 15189:2012	Ciudad de Guatemala, Guatemala May 12-15, 2015 Spanish		IAAC OGA PTB	ISO 15189:2012 -Workshop report
Workshop on Labeling Programmes in Latin America and the Caribbean: Label Designs, their Technical Fundaments and Surveillance.	Quito, Ecuador April 21-23, 2015 English and Spanish		IAAC INEN PTB	Label designs - Workshop report
Workshop on accreditation of Proficiency Testing Providers based on ISO/IEC 17043	Asuncion, Paraguay March 22-24, 2015 English and Spanish		IAAC ONA PTB	ISO/IEC 17043 - Workshop report ISO/IEC 17043 -Workshop survey results
Workshop on Energy Management based on ISO 50001, applied to energy efficiency.	Santiago, Chile March 10-11, 2015 English and Spanish		IAAC INN PTB	ISO 50001 - Workshop report
Closing workshop regarding the Inter-laboratory comparison on energy efficiency in refrigerators.	Mexico City, Mexico February 26 & 27, 2015 English and Spanish		IAAC NYCE PTB	Closing on the intercomparison - Report of the workshop
Workshop on Traceability Measurement Results	Guatemala City, Guatemala August 30, 2014 English and Spanish		IAAC OGA PTB	Traceability of the results in the measurements - Report of the workshop
Workshop for experienced IAAC peer evaluators	Guatemala City, Guatemala August 23-24, 2014 English and Spanish		IAAC OGA PTB	Report is available in the Members Only Section of the MLAC
Workshop on ISO/IEC 17065, applied to energy efficiency.	Buenos Aires, Argentina April 2014 English and Spanish		IAAC OAA PTB	ISO / IEC 17065 - Workshop Report
Workshop for experienced IAAC peer evaluators	Port of Spain,Trinidad and Tobago August 2013 English and Spanish		IAAC TTLABS PTB	Report is available in the Members Only Section of the MLAC
Workshop for new IAAC peer evaluators	Ottawa, Canada May 2013 English		IAAC SCC PTB	Report is available in the Members Only Section of the MLAC
Workshop for new IAAC peer evaluators	Quito, Ecuador November 27-29, 2012 English and Spanish		IAAC OAE PTB	Report is available in the Members Only Section of the MLAC
Workshop on ISO/IEC 17020:2012	San Salvador, El Salvador October 29-30, 2012 Spanish		IAAC OSA PTB	Workshop Report
2nd Workshop for the Inter-Laboratory Comparisons Working Group	Santiago, Chile March 12-13, 2012 English and Spanish		IAAC INN PTB	Interlaboratory comparisons - Workshop Report
2nd Workshop on Best Accreditation Practices	Santiago, Chile March 8 -9, 2012 English and Spanish		IAAC INN PTB	Good accreditation practices - Workshop Report
Seminar "Accreditation tool for regulatory bodies and the implementation of its policies"	Quito, Ecuador August 25, 2011 English and Spanish		IAAC OAE	IAAC IAF-ILAC ISO-CASCO-Confromity Assessment ISO-CASCO-26000
Workshop on Best Accreditation Practices	Quito, Ecuador August 19-20, 2011 English and Spanish		IAAC OAE PTB	Course concept Workshop Report
Workshop for the Inter-Laboratory Comparisons Working Group	Bogota, Colombia August 16-18, 2011 English and Spanish		IAAC ONAC PTB	Interlaboratory comparisons - Workshop Report
Workshop on ISO/IEC 17021 Part 2	Mexico City, Mexico June 14-15, 2011 Spanish		IAAC ema OEA	Course Presentation
Workshop for the Clinical Laboratories Working Group	Santiago, Chile April 2011 English and Spanish		IAAC INN PTB
Workshop for new IAAC peer evaluators	Lima, Peru April 13-15, 2011 English and Spanish		IAAC INDECOPI-SNA OEA - PTB	Report available in the Members Only Section of the MLAC
Workshop for experienced IAAC peer evaluators	Washington, D.C. February 22, 2011 English		IAAC NVLAP - NIST OEA	Report available in the Members Only Section of the MLAC
Seminar "Accreditation body relationship with the regulator and the market"	Rio de Janeiro, Brazil August 26, 2010 English and Spanish		IAAC Cgcre OEA	CONAC IAAC A2LA Cgcre Petrobras
Workshop for experienced peer evaluators	Rio de Janeiro, Brazil August 20, 2010 English and Spanish		IAAC Cgcre OEA	Report available in the Members Only Section of the MLAC
Workshop on Best Accreditation Practices	Asuncion, Paraguay June 14-16, 2010 English and Spanish		IAAC ONA PTB	Workshop on good accreditation practices - Report of the Workshop
5th Part - Proficiency Testing Workshop "Analysis of PT results in order to make decisions"	Quito, Ecuador March 3-5, 2010 English and Spanish		IAAC OAE PTB	Workshop on good accreditation practices - Report of the Workshop
Workshop on ISO/IEC 17024	Guatemala City, Guatemala March 9-10, 2010 English and Spanish		IAAC OGA OAS	ISO / IEC 17024 - Report of the Workshop
Workshop on clinical/medical laboratories accreditation based on ISO 15189	Santo Domingo, Dominican Republic November 11-13, 2009 English and Spanish		IAAC CROSQ OEA	ISO 15189 - Report of the Workshop
Workshop on Food Certification	Buenos Aires, Argentina September 28-30, 2009 English and Spanish		IAAC OAA PTB	Food Course Report.pdf Instructor report course alim.pdf
Workshop for experienced peer evaluators	San Jose, Costa Rica September 5, 2009 English and Spanish		IAAC ECA OEA	Report available in the Members Only Section of the MLAC
Seminar "Market surveillance through accredited Conformity Assessment Bodies"	San Jose, Costa Rica September 3, 2009 English and Spanish		IAAC ECA OEA	Set 01 Set 02 Set 03 Set 04
Workshop on ISO/IEC 17020	Panama City, Panama April 1-3, 2009 Spanish		IAAC CNA OEA	Workshop Repo
Workshop for new peer evaluators	Maryland, USA March 16-18, 2009 English		IAAC A2LA APLAC	2009-03 PeerEval course.doc
Workshop on the development of a Business Plan	Buenos Aires, Argentina February 15-17, 2009 Spanish and English		IAAC OAA PTB	Busplancourse forms.pdf
4th Part - Proficiency Testing Workshop	Mexico City, Mexico November 19-21, 2008 Spanish & English		IAAC ema PTB	Final Report-Workshop Mexico-v.6E.pdf
Workshop for new peer evaluators	Mexico City, Mexico November 19-21, 2008 Spanish		IAAC ema OEA	Report available in the Members Only Section of the MLAC
Workshop on ISO/IEC 17024	Asuncion, Paraguay September 13-14, 2008 Spanish and English		IAAC ONA OAS	17024informecurso.jpg
Seminar "International Trade and the role of Accreditation"	Asuncion, Paraguay September 11, 2008 Spanish and English		IAAC ONA OAS	Seminar Report
3rd Part - Proficiency Testing Workshop	San Jose, Costa Rica April 22-25, 2008 English and Spanish		IAAC ECA PTB	PTworkshopreportCostaRica.pdf
Workshop for IAAC peer evaluators	San Jose, Costa Rica February 12-15, 2008 English & Spanish		IAAC ECA PTB	2008 PTBPeerEvalWkshpReport.pdf

List of IAAC Stakeholders organized alphabetically by country

• All
• A
• B
• C
• E
• G
• I
• P
• U
• V